MicroWaterMan.com.Home|Privacy Policy|Contact Us

Bringing You The Best Products @ The Best Prices!

 Pre-filtration Cartridge Filters

for
Alkaline Micro-Water Ionizers

Order Now

What's hiding in your water?

Use this All-In-One test kit to check for
Bacteria
Lead
Pesticides
Nitrates/Nitrites
Chlorine
Hardness Level

WATERSAFE
All-In-One Test Kit

 

Are you drinking healthy alkaline & anti-oxidant water?
 
Check it with
pH Testers & ORP Meters
,
from Hanna Instruments

When You Simply Don't Trust Your Tap Water

Use the Flojet Pump

We offer a wide variety of specialty filter cartridge systems designed to handle virtually any water quality problem, and work in concert with your alkaline Microwater ionizer. In most cases your water ionizer will work just fine on your existing water supply. However, for those customers who live in an area with poor water quality or have a particular concern about certain substances in their water, specialty filters that have been designed to efficiently remove a wide variety of contaminants in your water without removing the minerals needed to ionize your water as it passes through your water ionizer. 

 The following is a list of cartridge functions for our specialty pre-filters and pricing:

Premium Quality Heavy Metal  Prefiltration Water Filters

Single Filter Housing (HOU-01)
This is a housing unit in which you can install one of the many filter cartridges listed below. Your tap water would be pre-filtered first before being filtered again in your water ionizer. In addition to filtering out a particular contaminant this may also extend the life of the filter in your water ionizer. This housing unit has ¼” john guest fitting holes.

 $34.99

Double Filter Housing with bracket (HOU-02)
This is a housing unit in which you can install two of the many filter cartridges listed below for even better filtration than the single housing unit. This housing unit has ¼” john guest fitting holes on both sides.

$52.99

Triple Filter Housing with bracket (HOU-03)
This is a housing unit in which you can install three of the many filter cartridges listed below for the most complete water filtration. This provides more options to filter a greater variety of contaminants. This housing unit has ¼” john guest fitting holes on both sides.

$63.99

Arsenic, Lead & Fluoride Pre-filter (10-AA)

This pre-filter is designed to remove arsenic, lead and fluoride. This is a wise investment. 

$36.95

Hardness Pre-filter (10-DI)
Some areas like certain parts of Washington State have a severe water hardness problem such that filtered water still leaves a white residue. This filter will help to reduce hardness.  

$49.99

Iron Buster Pre-filter (10-4215)

 $59.99

Lead Pre-filter (10-3004)

$49.99

Nitrate Selective Pre-filter (10-3610)

$62.98

Coral Calcium Remineralizer Pre-filter (10-CC)
For use where there are minerals missing from water (ie. after Reverse Osmosis unit). RO water or Distilled water cannot be ionized unless minerals are added.

$84.99

 

Sulphur Pre-filter (10-KDF85)

$67.99

 

Tannin/Organic Pre-filter (10-WS)

$77.99

 

10 Micron Sediment Pre-filter (SED-1010)

$25.99

 

5 Micron Sediment Pre-filter (SED-1005)

$25.99

 

1 Micron Spun Pre-filter (SED-1001)

$29.99

 

0.5 Micron String wound Pre-filter (0.5PP10)

$34.99

 

0.2 Micron for Bacteria & Cyst (CERAMZ.ST)

$39.99

 

Capacities of each filter vary depending upon incoming water quality and volumes of water used. If you are experiencing a problem not listed above, we can custom design a pre-filter for virtually any water quality problem. Take the first step down the road to feeling good about the water you drink and call (718) 690-5385

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

There are still more places to visit on Microwaterman.com

The End