People everywhere are coming to
the conclusion that fluoride, which was thought to
prevent tooth decay, is really a neurotoxin. Learn more
about the
dangers of consuming fluoride. We also have the only
economical fluoride test kit in the USA to see if you
have more than 2 ppm for fluoride in your drinking
water. After learning the facts about fluoride you will
wonder why is this even considered a controversial issue
and see why many people are being
acting now to protect their families by removing
fluoride from their
tap water.
CRYSTAL QUEST® Classic
Countertop disposable Fluoride Multi PLUS Water Filter
System is an impressive seven stage filter that is
dependable and built to last for years. This counter top
system installs in seconds and sits on the counter top
for water on demand. Quick and easy to use, stylish,
convenient, and effectively removes FLUORIDE and many
contaminants from water.
Installation
The
Crystal Quest
Classic
Disposable filter is quick and easy to install. follow
these simple instructions>
 |
 |
 |
|
Check your thread
type |
outside threads:
no adapters needed |
Inside threads:
select which adapter to use |
-
Remove aerator from
your faucet on which the filter will be installed
-
Determine the type of
threads on your faucet. If your faucet has outside
threads then no adapters should be needed. If
your faucet has inside threads then you will need to
select the correct adapter and washer and screw then
into the faucet and tighten manually. The adapters
included with your Crystal Quest
Classic
Disposable filter will fit most faucets.
-
Screw the diverter
valve onto the faucet, turning swivel collar to
tighten. Make certain that the gasket is positioned
securely between the diverter valve and the faucet
or adapter. Rotate diverter valve stem to desired
position. The swivel color may need retightening.
-
Turn on the water then
turn the diverter handle to send water to the filter
system.
Enjoy!
CRYSTAL
QUEST ® Utilizing the latest technologies in water
industry, coupled with 30 years of manufacturing
expertise, we provide you with the most effective,
healthy, great-tasting water, conveniently, at the most
affordable price. Our products are attractive, easy to
install and use, and removes more than 500 contaminants
from water. The unique design allows for a substantial
amount of filtration media enabling more contact time
with the water. More contact time means better
filtration.
Crystal Quest's
7 Stages of Filtration
Stage
1 Water flows through pre and post one -
micron filter pads (1 micron equals 1/25,000th of an
inch), which removes suspended particles such as silt,
sediment, cyst (Giardia, Cryptosporidium), sand, rust,
dirt, and other un-dissolved matter.
Stage 2,
water travel through FLUORIDE REMOVAL resin.
Containing synthetic Aluminum Oxide
adsorbant media. Specifically
designed to have a high affinity for Fluoride, Lead and
Arsenic. It removes metals through a mixture of
adsorption and chemical reaction with the media,
therefore, the elimination is not reliant on ion
exchange. It has uniform particle size, is physically
stable and can be used over a wide pH range. Capacity:
2700 ppm Fluoride (Avg. 600 to 900 Gallons) .* As high
as 6600 ppm F+ with effluent levels below 0.2 ppm from
10 ppm F+ feed.* This media also effectively removes lead and arsenic.
Stage
4, water flows through ion exchange resins,
reducing heavy metals such as lead, copper, aluminum,
and water hardness.
Stages
3, and
5, water flows through a bed of media made of
a special high-purity alloy blend of two dissimilar
metals - copper and zinc (ERA-6500, ERA-9500). ERA-6500
and ERA-9500 are major advancements in water treatment
technology that works on the electro-chemical and
spontaneous-oxidation-reduction (Eagle Redox Alloy®)
principles. Chlorine is instantaneously and almost
inexhaustibly oxidized.
Iron and hydrogen sulfide are oxidized into insoluble
matter and attach to the surface of the media. Heavy
metals such as lead, mercury, copper, nickel, chromium,
cadmium, aluminum, and other dissolved metals are
removed from the water by the electrochemical process.
They are attracted to the surface of the media, much
like a magnet. The media inhibits bacterial growth
throughout the entire unit. In fact, it has been shown
to be reduced up to 90%, eliminating the need for
silver, which is commonly used in carbon-only filters
(silver is considered a pesticide by the EPA and, as
such, must be registered with them). Is copper or zinc
added to the water in any significant amount? On 2.3 ppm
chlorinated water, <0.05 mg/l copper and only 0.46 mg/l
zinc were measured. The EPA aesthetic levels are 1.0
mg/l for copper and 5.0 mg/l for zinc. Both zinc and
copper are essential minerals for good health - the FDA
recommends a daily intake of 15 mg of zinc and 2 mg of
copper. For more information click on
Eagle
Redox Alloy® 6500, and Eagle Redox Alloy® 9500.
Stage
4, water flows through ion exchange resins,
reducing heavy metals such as lead, copper, aluminum,
and water hardness.
In stage 6, water
flows through granulated activated carbon (GAC). GAC is
universally recognized and widely used as an effective
adsorbent for a wide variety of organic contaminants,
such as chlorine (99.9%), chemicals linked to cancer (THM's,
benzene) pesticides, herbicides, insecticides, volatile
organic compounds (VOC's), PCB's, MTBE's and hundreds of
other chemical contaminants that may be present in water
causing bad taste and odors in your drinking water.
Carbon is extremely porous and provides a large surface
area for contaminants to collect. Carbon-only filters
must also use their capacity for chlorine removal,
resulting in a shortened life. They also may use a
bituminous coal carbon, which is good at removing
chlorine, but not as effective at removing chemicals. We
use a high-grade coconut shell carbon that is most
effective at removing chemicals. Coconut shell carbon
provides a significantly higher volume of micro-pores
than either coal, wood or lignite based carbon. As a
result, it is more effective than other carbon types in
removing trihalomethanes (THM's) and other chemicals
from municipally supplied water. Since our REDOX media
removes the chlorine before it reaches the carbon, the
carbon capacity is not wasted on chlorine and is free to
concentrate more effectively on organic contaminants.
It can be easily back washed. Semi annually back washing of
the unit not only ensures balanced filtration and eliminates
the potential for channeling, but also back-flushes the
unit.
Optional: Washable Pre-filtration Filter
Washable
Pre-filtration Filter. Specially designed for use with
any kind of water system with an unusually large amount
of sediment that can clog up the water filter. This
pre-filter helps remove the sediment, thus enabling your
filter to work more efficiently and extend the lifetime
of filters. It is installed between the water filter and
the tubing. No tools are necessary for installation.
Filter elements are easy to replace. Inside is a fine
stainless steel filter and an FDA approved 4 micron
filter that is easy to clean out.
Recommended flow rate: below 0.5 GPM.
Sits on the counter and easily connects to any kitchen
faucet.
A diverter valve switches between filtered and
unfiltered water.
Reduce Electric Bill & EMF Pollution
